Fire-Rated Doors Dubai
Aluminium fire-rated doors, walls, partitions, and curtain wall for UAE projects. Aluprof EI 15 to EI 120 systems — tested to UK and European standards, certified by IFT Rosenheim, ITB, and ATG.
Fire-rated aluminium doors and screens are a compliance requirement on almost every multi-storey project in the UAE — and getting them right is the difference between Civil Defence sign-off on first inspection and a costly hold-up before handover. London Architectural Aluminium fabricates fire-rated aluminium systems from our Al Qusais facility across the full EI 15 to EI 120 range, using Aluprof’s fire-rated range. Browse the systems we work with below, organised by application.
Fire-rated systems we fabricate
Aluprof fire-rated systems organised by application. Each tile opens a quote request pre-set for that system.
Best for Doors
Stairwell enclosures, lift lobbies, cross-corridor compartmentation, and protected egress. EI 15 to EI 90 in a single profile family.
Aluprof MB-78EI
AluprofMost-specified Aluprof fire door in UAE buildings. Stairwell enclosures, lift lobbies, cross-corridor break points. Single + double leaf.
Aluprof MB-78EI DPA
AluprofPanic-exit variant of MB-78EI — EN 1125 push-bar / touch-bar hardware compatible. Fire-exit doors at stairwell discharge and emergency egress.
Aluprof MB-86 EI
AluprofFor projects already specifying the MB-86 thermal door elsewhere — gives visual continuity between fire and non-fire openings on the same elevation.
Best for Internal Partitions & Walls
Walls, screens, integrated wall+door assemblies. EI 30 to EI 120 — for stairwell enclosures, refuge floors, plant-room compartmentation, and office fire zoning.
Aluprof MB-118EI
AluprofFlagship 118 mm wall system. Heaviest rating in the line-up — used for refuge floors, fire-fighting cores, plant rooms, and stairwell enclosures on taller buildings.
Aluprof MB-78EI Partitions
AluprofSame MB-78EI profile in door-less, glazed-only partition configurations. Office compartmentation, cross-corridor screens, lobby separations.
Best for Curtain Wall
Fire-rated façade compartmentation — between adjoining buildings, atrium edges, floor-to-floor spandrels, and cross-block boundaries.
Aluprof MB-SR50N EI
AluprofStick-system fire-rated curtain wall. The right choice for façade fire compartmentation between adjoining buildings or between floors.
Aluprof MB-SR50N EI EFEKT
AluprofStructurally-glazed (silicone-jointed) variant — no exposed pressure plates on the visible elevation. Cleanest façade sightlines with the EI rating intact.
Where fire-rated aluminium glazing is required in UAE buildings
Dubai Civil Defence and the Abu Dhabi DMT enforce specific fire compartmentation requirements on multi-storey projects. The systems above typically sit at:
EI ratings in plain language
EI ratings come from EN 13501-2 and combine two performance criteria. The number after EI is the rated minutes.
Local fabrication advantage
Fire-rated certification is granted to a complete tested assembly — profile, glass, gasket, intumescent, hardware, and connections all together. Imported finished fire doors are delivered as a fixed-size product; modifying them on site invalidates the test certificate.
Local fabrication at our Al Qusais facility lets us size doors, walls, and curtain wall to the actual opening on architect drawings while staying within the Aluprof tested specification. The documentary chain — test report, manufacturer’s certificate, installer’s statement of conformity — remains intact end-to-end.
Aluprof publishes test reports from IFT Rosenheim (Germany), ITB (Poland), and ATG (Belgium) covering EN 13501-2 (fire classification) and EN 1191 (self-closing). UAE consultants demonstrating Civil Defence compliance use this exact documentary chain.
Frequently Asked Questions
Common questions about fire-rated aluminium systems on UAE projects.
EI ratings come from EN 13501-2. The number is the rated minutes the assembly maintains both Integrity (E — resistance to flame penetration) and Insulation (I — heat transfer to the unexposed side). EI 30 holds for 30 minutes; EI 120 holds for 2 hours. UAE consultants typically specify EI 30 or EI 60 for cross-corridor compartmentation, EI 90 for stairwell enclosures on taller buildings, and EI 120 for refuge floors and plant rooms.
Aluprof fire-rated systems are tested and certified to European standards (EN 13501-2 fire classification, EN 1191 self-closing performance) with assembly audits by IFT Rosenheim, ITB, and ATG. UAE Civil Defence accepts the European certification chain on the consultant’s documentary submission, alongside the local installer’s statement of conformity that the assembly was fabricated to the tested specification.
Yes. Fire-rated certification is granted to a complete tested assembly, so fabrication must follow the manufacturer’s tested specification exactly. Local fabrication at our Al Qusais facility lets us size doors to the actual opening on architect drawings without invalidating certification — something not possible with imported fixed-size finished doors.
Dubai Civil Defence and Abu Dhabi DMT enforce fire compartmentation at stairwell enclosures (typically EI 60 or EI 90), lift lobbies, cross-corridor break points (EI 30 or EI 60), plant rooms and electrical risers (EI 60 to EI 120), fire-rated façades where adjoining buildings share a boundary, and entrance screens on certain hospitality and commercial fit-outs.
Yes. Aluprof fire-rated systems are tested to EN 13501-2 (fire classification) and EN 1191 (self-closing), with assembly audits by IFT Rosenheim (Germany), ITB (Poland), and ATG (Belgium). Architects who have specified Aluprof on UK or European projects can carry the same approval package across to UAE projects.
Lead times vary by project size and specification, but local fabrication at our Al Qusais facility means shorter lead times than importing finished fire-rated doors from Europe. We can confirm a lead time on receipt of architect drawings, the fire strategy document, and the door / wall schedule.
Not sure which system is right for your project?
Send us your drawings, fire strategy document, or door schedule. We’ll recommend the right Aluprof fire-rated system, EI rating per opening, and lead time — quote returned in AED within 48 hours.